Intelligent Lighting Controller

$385.00

Intelligent Lighting Controller (ILC) is an electronic control system specifically designed for switching and dimming lighting loads in experimental aircraft.  ILC provides independent switching of four (4) lighting circuits which may be used to control landing lights, taxi lights, strobe lights and navigation lights.   The lighting loads can be any combination of incandescent, LED, or HID.  Additionally, ILC includes three (3) independently controlled dimming circuits which may be used to control incandescent or LED instrument and cockpit/cabin lights.   ILC includes a switching panel and remote power control module.

Model:

  • Intelligent Lighting Controller (ILC-4ch) – $385.00
SKU: ILC-4CH Category:

Product Description

Intelligent Lighting Controller (ILC) is an electronic controller designed specifically to operate the lighting circuits used in homebuilt or experimental aircraft. ILC provides control of up to four (4) lighting circuits and each circuit can control up to 10 amps of load. ILC also includes three (3) dimming circuits for instrument and cockpit/cabin lights. Each dimming circuit is independently powered and controlled and can control incandescent or LED lighting up to 1 amp. ILC also provides a wig-wag function between two of the lighting circuits, such as landing and taxi lights for increased aircraft visibility. 

ILC includes a switching panel and remote power control module. The switching panel includes 4 backlit ergonomic rocker switches for the lighting circuits and three dimmer knobs. 

ILC operates from 10-30 volts DC.

Intelligent Lighting Controller

Non-certified

 

ILC-4CH

Input Voltage:

10 – 30 volts DC

Outputs:

4 switched circuits rated at 10 amps each
3 dimmed circuits rated at 1 amp each

Dimmers:

True DC:DC converter with full power filtering and regulated 2-12 volt outputs

Inputs:

All switch inputs are low current closures to voltage

Wig-Wag:

150 cycles/minute between channel 1 & 2
1 minute warm-up time

Wiring:

Standard 15-pin dsub connector (male on controller for connection to switching panel
Terminal blocks for all power connections rated for up to 12 awg wire

Enclosure:

Overall dimensions 4.7” x 3.7” x 1.2”
Cast aluminum

Weight:

1 lb.

For Experimental Aircraft ONLY, not TSO’d

Instruction Manuals